Timer Countdown Indication
30 minutes before the end of a timer operation
is reached, a countdown start tone sounds
and the function hand starts to indicate the
remaining time until the end of the timer
operation.
The countdown start tone will not sound
●
when the timer start time is 30 minutes or
less.
Function hand
Note
You can use the procedure below to
●
enable or disable the countdown start
tone.
Disabling the Countdown Start
l
Tone
During a period within 30 minutes of
●
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
Watch Operation Guide 5658
Hand Alignment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Using CASIO WATCHES to
Adjust Hand Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
alignment.
Adjusting Hand Alignment
l
Adjusting Hand Alignment
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This starts the function hand indicator
alignment operation.
After 3.5 seconds
3.
If the function hand is not aligned with 12
o'clock, use (B) and (D) to align it.
4.
Press (C).
This enables adjustment of the hour and
minute hands.
5.
If the hour and minute hands are not at 12
o'clock, use (B) and (D) to align them.
6.
Press (A) to exit the setting screen.
Adjustment
After five seconds
Function hand
Minute hand
Hour hand
Other Settings
This section explains other watch settings you
can configure.
Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
Press (C) nine times (or 10 times).
This causes the language setting to flash.
4.
Use (D) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5.
Press (A) to exit the setting screen.
23