Installing The Additional Driver - Epson AcuLaser CX37DN Series Reference Manual

To solve this problem, specify the setup information file (ntprint.inf) of the operating system with a
different bit number when installing the additional driver on the print server.
The following describes how to install the additional driver by specifying a setup information file in a
different computer from that the print server.
Note:
❏ Before starting this procedure, prepare to configure a different client computer from that of the print
server and install the operating system that has a bit number different from that of the print server.
❏ On the print server side, the system drive of the client computer is assigned as the network drive.
Configure the setting to share the drive to be assigned in advance.

Installing the Additional Driver

As an example, the following procedure describes the operations performed when Windows Server
2008 (32 bits) is running on the print server and Windows Vista (64 bits) is running on the client
computer.
1. Specify the client computer (64 bits) drive installed with the operating system (normally, drive C)
as a shared drive.
Note:
This setting is available for only PostScript driver.
2. From the print server (32 bits), map the client computer (64 bits) drive (for example, "C"),
specified as a shared drive in step 1, as a network drive (for example, "z").
Note:
This setting is available for only PostScript driver.
3. Install on the print server (32 bits) the driver for a 32-bit operating system.
4. Right-click the printer that was installed, and then click the appropriate menu command to
display printer properties.
5. Select the Sharing tab, and then select the Share this printer check box.
6. Click Additional Drivers.
The Additional Drivers dialog box appears.
Epson AcuLaser CX37 Series Reference Guide
Network Printing 73