LG GD1329CES Owner's Manual page 25

Part 5 PROGRAMMING MODE -
6 6
Special price ending time setup
Entering set up mode.
You will see LqC1
Note
When setting up a special price period, the ending time must be later than the beginning time.
Press the High Temp. button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Display previous special price ending time.
Press Med Temp.(+) or Low Temp.(-) button to select time
between 0 and 23.
Press the Start button.
The machine sets up the special price ending time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
2 5