Part 6. Maintenance - LG GD1329CES Owner's Manual

Part 6 MAINTENANCE
Regular cleaning
WARNING:
To reduce the risk of fire, electric
shock, or injury to persons when using this appliance,
follow basic precautions, including the following:
• Unplug the dryer before cleaning to avoid the risk of
electric shock. Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
• Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer. They will damage the
finish.
Cleaning the Exterior
Proper care of your dryer can extend its life.
The outside of the machine can be cleaned with warm
water and a mild, nonabrasive household detergent.
Immediately wipe off any spills with a soft, damp cloth.
Note
Do not use methylated spirits, solvents, or similar
products.
Never use steel wool or abrasive cleansers; they can
damage the surface.
Cleaning the Interior
Wipe around the door opening and seal with a soft, damp cloth to
prevent lint and dust buildup that could damage the door seal.
Clean the window with a soft cloth dampened with warm water and a
mild, nonabrasive household detergent; then wipe dry.
The stainless steel drum can be cleaned with a conventional stainless
steel cleaner, used according to the manufacturer's specifications.
Never use steel wool or abrasive cleansers; they can scratch or
damage the surface.
Cleaning Around and Under the Dryer
Vacuum lint and dust from around the dryer and
underneath it regularly. Vent ductwork should be checked
for lint buildup and cleaned at least once per year. If any
noticeable reduction in airflow or drying performance
occurs, immediately check ductwork for obstructions and
blockages.
Maintaining Ductwork
Vent ductwork should be checked for lint buildup and
cleaned at least once per year. If any noticeable reduction
in airflow or drying performance occurs, immediately check
ductwork for obstructions and blockages. Contact a
qualified technician or service provider.
Cleaning the Lint Filter
Always clean the lint filter after every cycle.
To clean, open the dryer door and pull the lint filter
straight up.Then:
1. Roll any lint off the filter with your fingers, or
2. Vacuum the lint filter, or
3. If the lint filter has become very dirty or clogged with
fabric softener, wash the lint filter in warm, soapy water
and allow to dry thoroughly before reinstalling.
Note
NEVER operate the dryer without the lint filter in
place. NEVER operate the dryer with a wet lint filter.
Lint Filter
4 1