Anti-theft detachable system cd/mp3/wma player,usb port with electronic anti-shock function, blue-tooth hands-free system, am/fm-rds digital pll tuning radio
Bluetooth-enabled - full ipod and iphone control through usb in-dash double-din mp3-compatible cd am/fm receiver with usb and sd memory card ports and front panel aux input (27 pages)
Summary of Contents for Boss Audio Systems EC3002
Page 1
INSTRUCTION MANUAL EC3002 ANTI-THEFT DETACHABLE SYSTEM CD/MP3/WMA PLAYER,USB PORT WITH ELECTRONIC ANTI-SHOCK FUNCTION, BLUE-TOOTH HANDS-FREE SYSTEM, AM/FM-RDS DIGITAL PLL TUNING RADIO...
1. RELEASE BUTTON 13. 5/ HANGD UP button 2 .POWER/MUTE BUTTON 14. 6/ TEL button 3. CD slot 15. PTY/ MODE 4. LCD 16. AUX INPUT Jack 5. EJECT button 17. USB Port 6&7. >>| or |<< buttons 18. BAND button 8、SEL button and VOL knob 19.APS button 9.
Page 4
inserting USB stick) and AUX mode. 3. To adjust the volume level Rotate the VOL knob to adjust the volume level during playback. 4. To mute or resume the sound Press the MUTE button to eliminate or resume the sound immediately during playback. To resume the sound immediately, user can also rotate the VOL knob.
Radio Operation: 1. To select radio band In RADIO mode, press the BAND button shortly and repeatedly to select your desired radio band in sequence and circulation as follows: -->FM1-->FM2-->FM3-->AM1-->AM2--> 2. To select for radio station manually or automatically Press >>| or |<< button to automatically search up or down for radio station frequency, Press >>| or |<<...
Page 6
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of checking time of each AFs depends on the signal strength of current station, from a few minute for strong station to a few seconds for weak station. Every time that new AF is stronger than current station, it switches over to that frequency for very short time, and NEW FREQUENCY is displayed for 1-2 second.
Press again to resume MMC/SD, USB or Disc playback. Press TOP/>|| button and hold for about 1 second to play the first track. 7. To scan tracks In disc, SD, USB playback mode, press INT button to display INTRO on LCD then play the first 10 seconds part of each track of all.
Page 8
3) For some mobile phones, they can automatically connect with the BT dvice of the car audio system and after pairing is ok; for some mobile phones, they need to select the paired BT device and press the CONNECTION button. When connection is OK, the LCD of the car audio system will show CONNECT. 2.
WIRES CONNECTION Note: IF YOUR CAR DOES NOT HAVE ISO CONNECTOR YOU CAN PROCURE IT FROM ANY ACCESSORY SHOP Important IF FIXED-ISO CONNECTOR IS CUT, THE GUARANTEE WILL BE VOID...
SPECIFICATION GENERAL Power supply requirement............DC 12V Current consumption............10A MAX Maximum power output.......4X60W(Measured at 14.4V) Number of channels............2 STEREO Chassis dimensions........178[W] X 50[H] X 165[D] FM SECTION Frequency range..........87.5MHz -107.9MHz(US) 87.5MHz-108MHz (EU) Usable sensitivity................3uV I.F Frequency...............10.7MHz AM SECTION Frequency range..........530KHz - 1710KHz(US) 522KHz-1620KHz(EU) I.F Frequency................450KHz Usable Sensitivity..............40dB...
Page 12
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.