Page 2
Trademarks NORTEL NETWORKS and Business Communications Manager are trademarks of Nortel Networks. Symbol, Spectrum24, and NetVision are trademarks of Symbol Technologies, Inc.
Page 3
Active handset display The handset display shown below is from the Model #: NP-4046-300 NetVision handset. If you have a NetVision data telephone or an older version of the handset, the shape of the display may have a different appearance, and the icons may be slightly different, however, the information is the same:...
Out of Range tones The signal strength icon indicator changes to an X when the handset moves out of range. The resulting out-of-range tone depends on the status of the handset. Handset icon Handset status Tone Idle 1 long beep and 2 short beeps Active call 2 short beeps You have 10 seconds to return to range or the...
Or you can use one of the following shortcuts: 1<feature code> (idle line or during call) <feature code> (idle line only) Note: 1 indicates the menu position of FEATURE. Ending a DTMF feature: Press to end sessions for DTMF features which require user input after starting a call and providing dialtone.
Page 6
Do Not Cancel Disturb When you are not on a call, prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call. Hunt groups If you are a hunt group member, you have access to Hunt group features. Language Choice Note: Alternate language choices only work for system-generated call features.
Page 7
and zone 0, 1, 2, 3, 4, 5, or 6 Page Make a page announcement to all, or to a specific group of telephones, through the telephone speakers. Zone 0 pages all zones. Note: NetVision External page handsets can only send Pages.
Page 8
To scroll through the speed-dial list: 1. Press once. 2. Scroll through the list shown on the display to find the number you want. 3. Press System Speed Dial Dial an external telephone number using a two-digit code (01 to 70). System speed dial codes can be used from any display telephone in the system.
Page 9
– To find the newest parked call: Enter (This code can also be assigned to the feature menu.) The call that was parked last will become the active call on your intercom key. When you repark a call, regardless of when it was received, it becomes the newest parked call.
Page 10
Voice Call Make an announcement or begin a conversation through the speaker of another telephone in the system. Note: Telephones without speakers, such as the NetVision handset, must be set up to receive voice calls as ringing calls. Voice Mail Login to voice mail system and receive and manage voice mail calls.