Dial Mode - AT&T BL102-3S Quick Start Manual

Telephone settings
Telephone settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to make a
local call (area code plus telephone number), you need to delete your home area code and
dial out locally from the call ID log. With the home area code displayed, press and hold
/DELETE until the digits are deleted, and then press
MUTE
area code is now restored to its default setting of _ _ _ (empty).

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary)
service, you must change the dial mode to pulse dialing before
using the telephone.
To set the dial mode:
1. Press MENU/
2. Use q or p
CID
3. Use q or p
CID
/SELECT.
MENU
4. Use q or p
CID
/SELECT.
MENU
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
DIR
to scroll to Dial mode, then press
DIR
to scroll to Touch-tone or Pulse, then press
DIR
21
/SELECT. The home
MENU
/SELECT.
MENU