Omron Medium Series Hardware Installation Manual page 78

NOTE:
The filter must be changed regularly to maintain efficiency. Please contact the Corporation to
purchase the filter if in demand.
Removal method:
Medium & Heavy Payload Series-Hardware Installation Manual TM12/14 Series Hardware Version: 3.2
Safety I/O

Preset operation project

TCP Settings

I/O Settings

I/O Wiring

1. Turn of the power and lay the control box flat.
2. Remove the rubber edge trim and loosen the air filter screw.
3. Pull out the air filter tray and replace the filter with a new one.
screw
Figure 73: Air Filter Tray
rubber
edge trim
tray
78