Advanced Operation; Caution Warning - Cobra MARINE MRHH150FLTE Owner's Manual

Advanced Operation

VHF Marine Radio Protocols Operating Your Radio
Intro Operation Customer
Assistance
Advanced Operation
RINE HH150 Several capabilities of your radio can add to its versatility and ease of use even though
Main Icons
they are not needed for its basic operation.
Customer
Installation
Channel 16 Mode
Assistance
SETUP
Channel 16+ mode gives you quick access to calling on Channel 16 from any
Secondary Icons
operational mode.
Intro Operation
H-M-L ENTER
To Switch to Channel 16:
Channel 16+ Button
1. Press the Channel 16+ button to change
Notice Caution
NEL
to Channel 16.
Installation
2. Press the Channel 16+ button again to return to the
16+
previously used channel.
Secondary Icons
VOL +
Notice
Channel 16
SIBLE
18 English
Warranty
Customer Warranty
Assistance
Warning
Customer
Assistance
NOTE
This key is labeled as "16+" for maximum visibility.
Caution Warning
Operating Your Radio VHF Marine Radio Protocols
FLOATING MARINE HH150
Intro Operation
Dual-Watch Mode
•
Dual-Watch mode gives you one button access to scan a total of two channels of most
ESC
importance to you. Channel 16 is preprogrammed and will always be one of the scanned
locations. The other channel can be any marine VHF channel of your choice.
Installation
Main Icons
PWR
MEM
DUAL-WATCH Button
Secondary Icons
SC/DW
Notice
VOL
Dual-Watch Scan Mode
Secondary Icons
Main Icons
Intro
Secondary Icons
Advanced Operation
Customer Warranty
Assistance
SETUP
Customer
Assistance
H-M-L ENTER
Using Dual-Watch
1. In Marine Standby mode, select the desired channel for
CHANNEL
Dual-Watch scanning.
2. Press the Dual-Watch button. The DW icon will appear 16+
Intro Operation Customer Warranty
Assistance
Caution Warning
on the LCD display and the radio will scan channel 16
and the selected channel.
3. A signal on any one of the two channels will
VOL +
Customer
Installation
stop the scan for 10 seconds to allow you to listen
Assistance
to the traffic on that location.
NOTE
SUBMERSIBLE
After the Dual-Watch scan stops to monitor a channel,
as long as you do not press any buttons within 10
Notice Caution Warning
seconds, your radio will automatically resume scanning
the Dual-Watch channels.
4. Press the Channel Up or Channel Down buttons
Operation Customer Warranty
Assistance
to resume scanning the Dual-Watch channels or
to change the scan direction.
5. To EXIT the Dual-Watch scan, press the Dual-Watch button
Customer
Installation
Assistance
again. The DW icon will disappear from the
LCD and the radio will return to Marine Standby mode.
NOTE
Dual-Watch also functions with a Memory channel.
Notice Caution Warning
Nothing Comes Close to a Cobra
® 19