Table of Contents
Advertisement
Fault
Condensation accumulates
on the surface of the
appliance and on the shelves
inside.
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
Fig. "
1. Switch off the appliance with the On/
Off button 1 and wait 5 minutes.
2. Switch on the appliance with the On/
Off button 1 and hold down
the temperature setting button 4 for 3-
5 seconds within the first 10 seconds
until 2 °C is lit on the temperature
display 2.
The self-test programme starts, when
the temperature displays lit up in
succession.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the super display 3 flashes for 10
seconds, an error has occurred.
Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Possible cause
The effect is reinforced if
ambient temperatures are
warm and humid.
Remedial action
Wipe away the water with a soft, dry cloth.
Open the appliance as briefly as possible
■
Make sure that the appliance is always
■
closed properly.
Customer service,
product / production
number and technical
data
Customer service
If you have any queries, are unable to
rectify faults on the appliance yourself or
if your appliance needs to be repaired,
contact Customer Service.
You can solve many problems yourself
by consulting the information on
troubleshooting in these instructions or
on our website. If this is not the case,
contact our Customer Service.
We will always find an appropriate
solution and try to avoid unnecessary
visits being made by a Customer Service
technician.
With any warranty claims, we will make
sure that your appliance is repaired by
trained Customer Service technicians
using genuine spare parts, including
after the manufacturer's warranty has
expired.
en
21
Advertisement
Table of Contents
