Using The Hob; Additional Functions - Smeg SI2631D Manual

Using the hob

Switching on the cooking zones
After switching on the display:
1. Select the cooking zone to be activated
using the appropriate selection buttons (e.g.:
front right cooking zone).
2. Use the and
power levels from 1 to 9 or enable the
Booster function.
Switching off the cooking zones
1. Select the cooking zone to deactivate.
2. Use the button to reset the power level
to 0 (zero).
• Hold the
least 2 seconds to switch off all
cooking zones at the same time.
• A zone can be switched off quickly
by pressing the
at the same time.
If a vessel not suitable for induction cooking is
used on an active zone or there is no vessel, the
zone will not deliver power and its display will
show the symbol alternating with the power
level number.
Power level table
The power in the cooking zones can be
adjusted to various levels. In the table below
you will find instructions for the different types of
cooking.
Power level
0
Cooking small amounts of food
from 1 to 2
from 3 to 4
Cooking large quantities of food,
from 5 to 6
from 7 to 8 Roasting, slow frying with flour
9
Bring a large amount of water to
P the boil (maximum power, see
28 - USE
buttons to select
button down for at
and buttons
Suitable for:
OFF setting
(minimum power)
Cooking
roasting larger portions
Roasting
"Booster function")
Booster function
See General safety instructions.
The Booster function allows you to heat a pan at
maximum power for a limited amount of time. It
can be used to bring a large amount of water to
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.
2. Press the button again; the
The Booster function remains active for
a maximum of 10 minutes, after which
the power level of the zone returns to 9.
will be shown on the display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.

Additional functions

Timed cooking
This function is used to program the automatic
switch-off of each cooking zone at the end of a
period of time set by the user (from 1 to 99
minutes).
To set a timed cooking:
1. Select any cooking zone using the specific
buttons.
2. Select a power level (from 1 to 9).
The timer cannot be activated if the
power level of the selected zone is zero
(0).
3. Press the select cooking zone button again;
a beep will be emitted to confirm.
The symbol will appear on the display of
the selected zone, while
the displays of the adjacent zones.
If one of the front zones has been
selected, the digits of the countdown
will appear on the displays of the rear
zones and vice versa.
4. Use the and
minutes (pressing continuously allows you to
advance quickly).
5. Press any select cooking zone button or wait
10 seconds to start the timer.
symbol
will appear on
buttons to select the
91477A308/A