Garmin GPSMAP 702 Series Owner's Manual page 66

Introduction
&WARNING
See the Important Safety and Product Information guide in
the product box for product warnings and other important
information.
Not all features are available on all models.
Device Overview
r
I Power key ·-
Automatic backlight sensor
microSD memory card slot
-~-
Tips and Shortcuts
• Press
6
to turn the chartplotter on.
• Select Home from any screen to return to the Home
screen.
• Select Menu to access additional settings about that
screen.
• Select Menu to close the menu when finished.
• Press
6
to open additional options, such as adjusting
the backlight and locking the touchscreen.
• Press
6
and select Power Off to turn the chartplotter
off.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or
scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Adding an Item to Favorites
1
From the home screen, select a category from the right.
2
Hold a button on the left.
The item is added to the Favorites home screen
category.
Accessing Owner's Manuals on the Chartplotter
1 Select Info
>
Owner's Manual.
2
Select a manual.
3 Select Open.
Downloading the Manuals
You can get the latest owner's manual and translations of
manuals from the web.
1 Go to www.garmin.comlmanualsiGPSMAP702-902.
2
TIP: To quickly open this web page, scan this code:
l!lj!~
~~
2 Download the manual.
Software Update
You may need to update the device software when you
install the device or add an accessory to the device.
Loading the New Software on a Memory Card
1
Insert a memory card into the card slot on the
computer.
2
Go to www.garmin.comlsupport/softwarelmarine
.html.
3 Select Download next to GPSMAP Series with SO
Card.
4
Read and agree to the terms.
5 Select Download.
6
Select Run.
7
Select the drive associated with the memory card, and
select Next
>
Finish.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software
onto a memory card.
1
Turn on the chartplotter, and wait for the home screen
to appear.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card
is inserted.
2
Open the memory card door
1 .
3
Insert the memory card @, and press it in until it clicks.
4
Close the door.
5
Follow the on-screen instructions.
6
Wait several minutes while the software update
process completes.
The device returns to normal operation after the
software update process is complete.
7
Remove the memory card.
NOTE: If the memory card is removed before the
device restarts fully, the software update is not
complete.
Contacting
Garmin~
Product Support
• Go to www.garmin.comlsupport for in-country
support information.
• In the USA, call913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 8501241.
Quick Start Manual