Bosch CMG978N 1A Series User Manual And Installation Instructions page 20

en Meat probe
ATTENTION!
Otherwise the meat probe may be damaged.
Do not trap the cable of the meat probe.
▶
Do not use cookware with a lid.
▶
To prevent the meat probe from being damaged by
▶
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
If, during operation with the microwave, the tip of the
meat probe is not fully inside the food, sparks will be
created.
Insert the meat probe fully into the food.
▶
Insert the meat probe into the food.
1.
The meat probe has three measuring points. Ensure
that at least the middle measuring point is inserted
in the food.
Thin Insert the meat probe into the thickest
pieces part of the meat from the side.
of meat
Thick Insert the meat probe diagonally into the
pieces meat from above, pushing it in as far as
of meat possible.
Note: If you want to turn the food, insert
the meat probe into the side of the food
so that it does not need to be removed
when turning.
20
Poultry Insert the meat probe into the thickest
part of the breast, pushing it in as far as
possible. The meat probe can be inser-
ted horizontally or vertically depending
on the size and shape of the poultry.
Turn the poultry and place it on the wire
rack breast-side down.
Fish When cooking whole fish, insert the
meat probe behind the fish's head in the
direction of the spine, pushing it in as
far as possible.
Place the fish on the wire rack in the
swimming position without turning it,
e.g. using half a potato as a support.
2. Place the food with the meat probe into the cooking
compartment.
Plug the meat probe into the socket on the left-hand
3.
side of the cooking compartment.
Notes
¡ If you remove the meat probe while the food is
cooking, all the settings are reset.
¡ Do not remove the meat probe when turning the
food. Once you have turned the food, check that the
meat probe is correctly positioned in the food.
13.3 Setting the meat probe
You can set a core temperature of between 30 °C and
99 °C.
Requirements
¡ The food with the meat probe is in the cooking com-
partment.
¡ The meat probe is inserted in the cooking compart-
ment.
Press "Types of heating" in the menu.
1.
Press the type of heating that you want to use.
2.
Use the setting ring to set the cooking compartment
3.
temperature.
Set the cooking compartment temperature at least
10 °C higher than the core temperature.
Do not set the cooking compartment temperature to
higher than 250 °C.
Press ⁠ "Meat probe".
4.
5. Use the setting ring to set the core temperature.
If required, use to reset the setting value.
Press to start the operation.
6.