Bosch CMG978N 1A Series User Manual And Installation Instructions page 19

Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
3. Press ⁠ "Added microwave".
Use the setting ring to set the microwave output.
4.
Press ⁠ "Cooking time" and set the cooking time.
5.
6. Press to start the operation.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
12 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your food
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Pizza setting
¡ Intensive heat
13 Meat probe
Cook with precision by inserting the meat probe
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
inside the food. Once the set core temperature has
been reached in the food, the appliance automatically
stops heating.
13.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
You can use the meat probe with the following types of
heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Gentle hot air
¡ Gentle top/bottom heating
¡ Circulated air grilling
¡ Pizza setting
¡ Intensive heat
7.
Changing added microwave
You can change or deactivate the added microwave at
any time.
1.
2.
a The change is applied.
extracts mois-
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
1.
2.
3.
4.
a The appliance starts heating.
a The setting values are shown on the display.
5.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
1.
2.
a The operation continues without the ventilation func-
into ¡ Slow cooking
¡ Bottom heat
¡ Keeping warm
13.2 Inserting the meat probe
Use the meat probe supplied or order a suitable meat
probe from our customer service.
Using the wrong meat probe could damage the insula-
tion.
▶
Ventilation function "Crisp Finish" en
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Press the microwave output
Change or deactivate added microwave with the
setting ring.
Set a suitable type of heating and a temperature.
If required, you can select other settings and com-
bine with the ventilation function.
Press ⁠ "Crisp Finish".
Press "On" in the setting ring.
Press to start the operation.
When the food is ready, use
ance off.
Press ⁠ "Crisp Finish".
Press "Off" in the setting ring.
tion.
WARNING ‒ Risk of electric shock!
Only use the meat probe for this specific appliance.
to switch the ap-
⁠ .
to switch the appli-
19