GBC Spire III 44T Instruction Manual page 6

SPIRE III Series – Installation and Operating Instructions
1. s
aFety
Your safety, as well as the safety of others is
important. Before you install or use the machine,
read and follow all the safety notices carefully in
this chapter. In this instruction manual, and on the
laminator, you will find important safety notices
related to the use of the laminator. Observe all the
safety information provided.
Read all of the instructions and save these
instructions for further use. Also make sure you have
been fully trained before operating the laminator.
The safety alert symbol precedes each
safety notice in this manual. The symbol indicates a
potential personal safety hazard to you or others.
This safety alert symbol indicates a potential
electrical shock. It warns you not to open the
laminator and expose yourself to hazardous voltage.
The following warnings are found on the SPIRE
Series laminator.
This safety notice means that you could be seriously
hurt or killed if you open the laminator and expose
yourself to hazardous voltage. Do not open the
laminator. There are no user serviceable parts inside.
Refer service to qualified service personnel.
This safety notice means that
the hot rollers could burn you
WARNING
and that your fingers and
hands could be trapped and
ATTENTION
crushed in the rollers. Clothing,
jewelry and long hair could be
MUCHO
caught in the rollers and pull
CUIDADO
you into them. Keep fingers,
hands clothing, jewelry, and
long hair away from the rollers.
HOT ROLLERS.
CRUSH HAZARD.
Keep hands and
fingers away.
ROULEAX
CHAUDE.
RISQUE DE
BROYMENT.
Tenir mains et
doigts a l'écart.
RODILLOS
CALIENTES.
RIESGO DE
PINCHAMIENTO.
Mantener manos y
dedos a distancia.
This safety notice means that
the hot rollers could burn you.
Keep fingers and hands away
from the hot rollers.
Page 1-1