Chapter 3: System Interface; Overview; Control Panel Buttons; Reset - Supero AS-1011M-Ni User Manual

3-1

Overview

There are several LEDs on the control panel to keep you constantly informed
of the overall status of the system. There are also three buttons on the chassis
control panel.
3-2

Control Panel Buttons

There are three buttons located on the front of the chassis: a reset button, a power
on/off button and a UID button.
RESET: Use the reset button to reboot the system.
POWER: This is the main power button, which is used to apply or turn off
the main system power. Turning off system power with this button removes the
main power but keeps standby power supplied to the system.
UID: Depressing the UID (unit identifi er) button illuminates an LED on both
the front and rear of the chassis for easy system location in large stack confi gura-
tions. The LED will remain on until the button is pushed a second time. Another
UID button on the rear of the chassis serves the same function. See the table in
Figure 3-1 for descriptions of UID LED states.
Chapter 3
System Interface
3-1

Chapter 3: System Interface