Table of Contents
Advertisement
LED Display change
button
Power LED
PoE LIM. LED
Temperature sensor LED
POWER LED (Power)
Green Light
Off
PoE LIM. LED (PoE limit)
Off
Green Light
Orange Blink
TEMP LED (Temperature sensor)
Green Light
Orange Blink
STATUS/ECO LED (Status/ECO mode)
Green Light
Green Blink
Orange Light
Orange Blink
GIGA (GIGA mode) LED
Green Light
FULL (DUPLEX mode) LED
Green Light
LOOP HISTORY LED (Loop History mode)
Green Light
Green Blink
Off
: Power is ON.
: Power is OFF.
: Supplying power in the range from 0 to 47 W.
: Supplying power in the range from 47 to 62 W.
: A single port's power supply is exceeding the upper limit, or
the total power supply of the Ethernet Switch is exceeding 62 W.
: The system is normally operating.
: The temperature exceeded the set threshold of the internal
temperature sensor.
Set threshold of the internal temperature sensor: 74°C
(factory default)
: Operating in status mode.
: Operating in ECO mode.
All Port LEDs (left) are turned off.
: Starting up
: Malfunction (Contact the seller.)
: Operating in GIGA mode.
: Operating in DUPLEX mode.
: Operating in Loop History mode.
: Loop is occurring, or occurred within
the last 3 days.
: No loop detection.
Status/ECO mode LED
GIGA mode LED
DUPLEX mode LED
Loop History mode LED
13
Advertisement
Table of Contents
