Safety Precautions For Installing The Unit On A Ceiling - Sony VPL-FH36 Quick Reference Manual

installing the unit. If you lift the unit by the
Security bar or hang the unit by this bar, it
may cause the unit to fall and be damaged,
and may result in personal injury.
For dealers
• When the projector is mounted on the
ceiling, the Sony PSS-610 Projector
Suspension Support must be used for
installation.
• Be sure to secure the cabinet cover firmly
when installing to the ceiling firmly.
Safety precautions for
installing the unit on a ceiling
• Never mount the projector on the ceiling
or move it by yourself. Be sure to consult
the store where you purchased the
projector or a dedicated installer.
• When installing the unit on a ceiling, be
sure to use a safety wire, etc., to prevent
the unit from falling. For the installation,
be sure to consult the store where you
purchased the projector or a dedicated
installer.
On Installation
• When installing the unit, leave space
between any walls, etc. and the unit as
illustrated.
More than
30 cm
13
(11 / ")
16
6
GB
Precautions
More than 30 cm
13
(11 / ")
16
More than
10 cm
15
(3 / ")
16
• Avoid using if the unit is tilted more than
15 degrees horizontally.
15°
• Avoid using if the unit is tilted more than
15 degrees vertically.
15°
15°
• Install the projector on the floor or ceiling.
Any other installation causes a
malfunction such as color irregularity or
shortening lamp life.
• Avoid using the unit in a location where
the temperature or humidity is very high,
or temperature is very low.
• Avoid installing the unit in a location
subject to direct cool or warm air from an
air-conditioner. Installing in such a
location may cause malfunction of the unit
due to moisture condensation or rise in
temperature.
15°
15°
15°