Dell W29C Service Manual page 77
Hide thumbs
Also See for W29C:
- Owner's manual (119 pages) ,
- Service manual (87 pages) ,
- Setup and specifications (27 pages)
Table of Contents
Advertisement
Table 12. System setup options—Passwords menu (continued)
Passwords
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 13. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
BIOSConnect
Dell Auto OS Recovery Threshold
Table 14. System setup options—System Management menu
System Management
Service Tag
Asset Tag
Wake on LAN/WLAN
Wake on LAN/WLAN
Default: OFF
NOTE:
Hard drive passwords must be cleared before the setting can be
changed.
Enables or disables Non-Admin PSID Revert.
Default: OFF
Enables or disables BIOS updates through UEFI capsule update packages.
Default: ON
Enables the computer to recover from a bad BIOS image, as long as the Boot
Block portion is intact and functioning.
Default: ON
NOTE:
BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Controls flashing of the system firmware to previous revisions.
Default: ON
Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system error.
Default: ON
Enables or disables cloud Service OS recovery if the main OS fails to boot
within the number of failures equal or greater than the value specified by
Dell Auto OS Recovery Threshold, and local Service does not boot, or is not
installed.
Default: ON
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.
Default: 2
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.
Enable or disable Wake on LAN/WLAN.
Default: Disabled
System setup
77
Advertisement
Table of Contents
