Dell W29C Service Manual page 75

Table 10. System setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare
USB Wake Support
Enable USB Wake Support
AC Behavior
AC Recovery
Block Sleep
Deep Sleep Control
Deep Sleep Control
Intel Speed Shift Technology
Table 11. System setup options—Security menu
Security
Intel Speed Shift Technology
Intel Speed Shift Technology
Intel Platform Trust Technology
Intel Platform Trust Technology On
PPI Bypass for Clear Commands
Clear
SMM Security Mitigation
Enables or disables USB PowerShare.
Default: OFF
Enables or disables USB Wake Support.
Default: ON
Enables to recover the last power state.
Default: Power Off
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enable or disable the deep sleep control.
Default: Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate
processor performance automatically.
Default: ON
Enable or disable the Intel Speed Shift Technology feature in the OS.
Default: ON
Enable or disable the Intel Platform Trust Technology (PTT) feature in the OS.
Default: ON
Enables or disables the Trusted Platform Model (TPM) Physical Presence
Interface (PPI). When enabled, the OS will skip BIOS Physical Presence
Interface (PPI) user prompts when issuing the Clear command.
Default: OFF
Enables or disables the computer to clear the PTT owner information, and
returns the PTT to the default state.
Default: OFF
Enables or disables additional UEFI SMM Security Mitigation protections.
Default: OFF
NOTE: This feature may cause compatibility issues or loss of functionality
with some legacy tools and applications.
System setup 75