Dell W29C Service Manual page 68

Steps
1. Place the base panel in an upright position and align the screw holes on the base panel with the screw holes on the
display-assembly base.
2. Replace the 13 screws (M3x5) that secures the base panel to the display-assembly base.
Next steps
1. Install the display panel.
2. Install the antennas.
3. Install the power-button
4. Install the display hinges.
5. Install the microphones.
6. Install the system board.
7. Install the media-card
8. Install the heat sink.
9. Install the M.2 2230 solid-state drive
10. Install the wireless card.
11. Install the memory module.
12. Install the retractable-camera
13. Install the coin-cell battery.
14. Install the fan.
15. Install the speakers.
16. Install the system-board
17. Install the hard drive.
18. Install the I/O cover.
19. Install the back cover.
20. Install the stand.
21. Follow the procedure in
68 Removing and installing components
board.
reader.
or M.2 2280 solid-state
assembly.
shield.
After working inside your
drive, as applicable.
computer.