Table of Contents
Advertisement
6
USB 3.1 upstream
ports (3)
7
USB 3.1 downstream
ports (3)
8
USB charging port
9
RJ-45 connector
Input sources and USB pairing
NOTE: Make sure to connect both input source cable and USB upstream cable
follow below pairing to enable touch function EX: If you connect HDMI 1 +
USB 2, then touch no function
Input sources
HDMI 1
HDMI 2
HDMI 3
DP
12
|
About your display
Connect the USB cable that comes with your display
to the computer. Once this cable is connected, you
can use the USB downstream connectors on the
display and the touch screen function on the display.
NOTE: Refer to section on
pairing".
Connect your USB device.
You can only use this connector after you have
connected the USB cable to the computer and USB
upstream connector on the display.
USB 3.1 downstream port with BC 1.2 charging
capability at 2A(Maximum).
Remote Network Management and control of display
via RJ-45.
USB upstream
Touch function works or not
USB 1
V
USB 2
V
USB 3
V
"Input sources and USB
Advertisement
Table of Contents
