AEG L 76485 HFL User Manual page 9

Table of Contents

Advertisement

Available languages

Available languages

D
• The programme time
When the programme starts, the time decreases with steps of 1 mi-
nute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
When the programme is completed.
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
5.4 Start/Pause button
Press button
to start or interrupt a
4
programme.
5.5 Delay start button
Press button
to delay the start of a
5
programme from 30 minutes to 20 hours.
5.6 Time save button
Press the button
6
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button
Press button
to add rinsing phases to
7
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
4
5
6
to decrease the
7
flashes.
4
5.8 Hot and cold water
connection button
If you set one of the first 6 washing pro-
grammes, the indicator of this button
comes on.
The hot water connection is on.
The appliance fills with hot and cold
from your domestic hydraulic system.
To wash with cold water only, press this
button to deactivate the hot water con-
nection.
We recommend that you deacti-
vate the hot water connection to
remove blood, egg and red wine
stains from the laundry.
5.9 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ENGLISH
9
8
9

Advertisement

Chapters

Table of Contents
loading

Table of Contents