Craftsman 38872 Owner's Manual page 17

TROUBLESHOOTING CHART
PROBLEM CAUSE CORRECTION
Srass catcher 1. Cutting height too low. 1_ Raise cutting height.
rmtfllllng (Ifso 2. L_ on blade worn off. 2. Replace blade.
aqulpped) 3. Catcher not venting air. 3. Clean grass catcher.
Hard to push ! 1. 1. Raise cutting height.
Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
dghtfor you.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
17