Cleaning The Shaver - Panasonic ES-SWLT2 Operating Instructions Manual

Operation and display of the switch lock
►Locking the power switch
1. Press once 2. Hold
and then more than
release. 2 seconds.
• The shaver • The switch
starts lock lamp
operating. ( ) will light
up for
5 seconds
and turn off.
• The shaver will
stop operating.
for 3. Release .
►Unlocking the power switch
1. Hold for more than
2 seconds.
• The switch lock lamp
( ) will turn off.
• The power switch is locked when the switch lock lamp
( ) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.

Cleaning the shaver

We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1. With the cleaning shutter closed, apply
some hand soap and some water to the
system outer foil.
2. Turn the shaver on and make foam for
a few seconds.
2. Once the shaver starts
operating, release
▼
.
15