Parts Identification; Preparation - Panasonic ES-SWLT2 Operating Instructions Manual

Parts identification


Front


WATER THROUGH
Back
WATER THROUGH






A Main body
1 Protective cap
2 System outer foil
 Water inlets
4 Cleaning shutter
 Foil frame release
buttons
 Thumb rest
 Power switch
To turn the shaver on
and off and also lock
and unlock the
power switch.
 Switch lock lamp ( )
10















 Charge status lamp
( )
 Appliance socket
 Foil frame
 System outer foil
release buttons
 Outer foil section
 Inner blades
 Trimmer
 Trimmer handle
B AC adaptor (RE7-87)
 Adaptor
 Power plug
 Cord
 Appliance plug

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug in the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does
not fit the power outlet, use
an attachment plug adaptor
of the proper configuration.
3
Disconnect the adaptor after charging is
completed and the charge status lamp ( )
turns off.
Note
You cannot operate the shaver while charging.
Accessories
C Cleaning brush
D Oil
2
1