Panasonic ES-SWLT2 Operating Instructions Manual page 14

2
Press when finished.
When the battery capacity is low
The charge status lamp ( ) blinks once
every second when operating the shaver.
The appliance beeps twice after switched off.
• You can shave 2 to 3 times after the
charge status lamp ( ) blinks. (This will
differ depending on usage.)
►Using the trimmer
Slide the trimmer handle up. Place at a
right angle to your skin and move
downwards to trim your sideburns.
►Tips for better usage
Apply the trimmer edge perpendicular to skin gently
and move downward slowly.
Trimming sideburns
14
Pre‑shave of long beards
►Notes
• After wet shaving, wash the main body with water and
apply oil to the system outer foil.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• The shaving sensor may not respond depending on
the type and quantity of the shaving gel or the quantity
of the foam. This is not abnormal.
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C (41 °F).
• To prevent erroneous operation, place your fingers on
the thumb rest while using the shaver.