Studiologic SL-2001 User Manual page 40

MIDIsw
The MIDI sw screen applies to switch messages from external instruments.
Use Control Slider 1 to select a MIDI switch message type:
sw # Definition_________sw #
64 Sustain (damper)
65 Portamento
66 Sostenuto
67 Soft Pedal
68 -
69 Hold 2
70 -
I -
79 -
80 Gen'l Purpose #\
If a controller type does not have a standard name, it will appear on Control Slider 1 as csw plus its number. Use Control
Slider 2 to adjust the depth. To block a message completely, set this slider for Off. Select the destination message using
Control Slider 3. If desired, any destination controller may be initialized when the preset is entered. Use Control Slider 4 to
set the initial value to be issued. The initial value can be sent to any destination, even if the depth setting is off.
The MIDI sw screen operates only if the zone has an external source and is not bypassed.
Definition
81 Gen'l Purpose #2
82 Gen'l Purpose #3
83 Gen'l Purpose #4
84
I
91
92 Tremolo Depth
93 Chorus Depth
94 Detune
95 Phaser Depth