Table of Contents
Advertisement
Control Slider 1 is used to enable SL-2001 preset changes via MIDI program change commands. Slider 3 is used to select the
device from which the SL-2001 will accept program change commands. Program changes from all input devices will be
accepted by selecting All on Slider 3.
The Conditional Preset Change function allows the SL-2001 preset change to be delayed if there are currently notes held (or
if the sustain pedal is pressed) on the keyboard. The conditional function may also be used with external keyboards. As
soon as the notes (and pedal) are released, the SL-2001 will change to the selected preset. The Conditional Preset Change
function applies to the front-panel PRESET switches as well as a preset-change command from any source (MIDI IN A through
D, Inc/Dec). During the time that the preset change is delayed, the Preset digits will flash until the conditions are met. If
desired, the conditional program change may be forced by using the All-Notes-Off function (press the Edit and Store switch-
es simultaneously).
PRESET FUNCTIONS
The Preset Functions have a different value for each SL-2001 preset. After any Preset-programmable function is edited, the
Store function must be used to save the changes in the preset. Enter Edit Mode and press FUNCTION switch 3 until the
desired screen appears. The Preset digits will be displayed to indicate the location being edited.
PRESET
Every preset on the SL-2001 may be designated by a 10-character name. This name appears on the text display during
Perform Mode. The Preset screen is used to enter the desired name.
Advertisement
Table of Contents
