Siemens CD634GA 0 Series User Manual And Installation Instructions page 19

Hide thumbs Also See for CD634GA 0 Series:
Table of Contents

Advertisement

Open the left- and right-hand locking levers.
2.
Partially close the appliance door such that it re-
3.
mains ajar at an angle of approx. 30°.
Take hold of the appliance door with both hands
4.
(one on each side) and pull it up and out.
Reattaching the appliance door
When the locking levers are closed, the appliance door
is secured in place and cannot be detached.
Note: Carry out the steps for detaching the appliance
door in the reverse order.
→ "Detaching the appliance door", Page 18
Slide the appliance door down as far as it will go so
1.
that the hinges can be inserted straight into the
opening.
Open the appliance door fully.
2.
Close the locking levers.
3.
Close the appliance door.
4.
12.8 Door panels
To make it easier to clean the door panels, you can re-
move the appliance door.
Removing the door panels
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
Open the appliance door slightly.
1.
Press on the left- and right-hand sides of the cover
2.
⁠ .
Remove the cover
3.
Lift out the inner panel upwards and set it down on
4.
a flat surface.
To remove and clean the condensate trough, if re-
5.
quired, open the appliance door fully.
Cleaning and servicing en
⁠ .
19

Advertisement

Table of Contents
loading

Table of Contents