Stealth Cam STC-WD3MT-RT User Manual page 29

When the camera is set to AVI capturing, the 10 seconds
clips will only turn out well in good daytime lighting
conditions. If the lighting conditions are not enough, unit
will switch the AVI to single image capturing automatically.
When using the AVI function, the camera cannot use the
flash. Time/Date stamp will not appear on the AVI video
clips.
Using the camera by manual shoot
•
Open the front housing and turn the camera on.
•
Program the capture mode to manual (Please refer to Program
& Set up section on page 11 of this manual)
•
Close the front housing.
•
The camera is now ready to be used as hand held point and
shoot camera.
•
Use the optical viewfinder to align your shot then press the
shutter button.
www.stealthcam.net
STC-WD3MT-RT
Toll Free 877-269-8490 29