Stealth Cam STC-WD3MT-RT User Manual page 18

Set the Time out:
•
Press the [UP] or [DN] button to highlight TIME OUT.
•
Press [OK] to enter the setting.
•
Press [UP] or [DN] button to set the desired time out in minutes
(one minute increment from 1-10 and five minute increments
from 10 to 60 minutes).
•
Press [OK] again to save the setting. This will return you to the
SETTING SCREEN menu.
•
Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
If no buttons are pressed within 30 seconds, the unit will
return one minute count down mode then start PIR
capturing.
Set TV System: NTSC is the correct setting for all of North
America. Your Stealth Cam STC-WD3MT-RT comes pre-
programmed for NTSC.
•
Press the [UP] or [DN] button to highlight TV OUT.
•
Press [OK] to enter the setting.
www.stealthcam.net
STC-WD3MT-RT
Toll Free 877-269-8490 18