Stealth Cam STC-WD3MT-RT User Manual page 19

•
Press the [UP] or [DN] to set the TV output in NTSC or PAL
system.
•
Press [OK] again to save the setting. This will return you to the
SETTING SCREEN menu.
•
Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
If no buttons are pressed within 30 seconds, the unit will
return one minute count down mode then start PIR
capturing.
Set Date and Time: This camera uses the 24hr military time
format.
•
Press the [UP] or [DN] button to move to highlight DATE AND
TIME.
•
Press [OK] to enter the TIME & DATE setting menu.
•
Press [UP] or [DN] to select the TIME
•
Using the UP and DOWN buttons set the appropriate hour then
press OK. This will highlight the minutes. Using the UP and
DOWN buttons select the appropriate minute.
www.stealthcam.net
STC-WD3MT-RT
Toll Free 877-269-8490 19