Toshiba MMW-UP0271LQ-E Service Manual page 34

<RBC-ASCU11 >
2, 5
3, 4
1
Push and hold the [menu +
2
Push the [OFF timer] button to confirm the selected indoor unit.
3
Push the [menu] button until the CODE No. flashes. And using the [
specify the CODE No.13.
4
Push the [menu] button until the SET DATA flashes. And using the [
an indoor unit address.
5
Push the [OFF timer] button to confirm the SET DATA.
6
When all the settings have been completed, push the [ON/OFF] button, return to normal
mode.
NOTE:
The LED on the P.C. board of the selected hot water module flashes. The hot water module for change
settings can be confirmed.
1 6
] buttons at same time for more than 10 seconds.
2
3, 4
3, 4
– 34 –
or ] buttons,
or ] buttons, set