Advertisement
Remove the middle bezel and put it into a fixture jip,
then tear off the black PVC tape and use
S14
head screwdriver to remove 1pcs screw for unlocking
the power key board with the front bezel.
(No.1 Screw size= M2x2.4, Torque=0.8±0.2kgfxcm)
Lift up the panel module and pull out the front bezel
S15
for releasing the front bezel.
a Philips-
1
Turn over the bracket chassis module. Remove the
S16
Mylar from the hooks of the bracket
Use a Philips-head screwdriver to remove
screws for unlocking power board and interface
board, and then release the panel lamp cable from
S17
the hook of the bracket.
(No.1 screw size=M4x8, Torque=6
No.2~7 screw size=M3x7.5, Torque=6
5
6
Remove the circuit boards from the
S18
chassis module carefully, and then
of the cables.
3
DELL S2721HGF
.
6pcs
kgfxcm;
±0.5
kgfxcm)
±0.5
2
3
4
1
bracket
disconnect all
Advertisement
