Message Notification; Local Settings - Gigaset A540 IP Manual

Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:anna@smith.com
BDAY:2008-12-24T11:00
END:VCARD
Activating/deactivating the display of new messages with the
flashing message key
For each handset, you can define the type of new messages for which the LED of
the message key f should flash.
You can activate/deactivate the flashing of the message key for the following mes-
sage types separately:
Missed calls, SMS, Email, Network mailboxes.
You can change the settings on the Web page:
¤
Settings Messaging
Making country-/location-specific basic settings, entering the
area code
If you use VoIP to make a call to the fixed line, you may also have to dial the area
code for local calls (depending on the provider). You can avoid having to dial your
own area code by:
u
Entering the complete area code (with international code) in the telephone con-
figuration for the location in which you are using the phone and
u
Defining per option that the local area code is automatically prefixed to every
number dialled that does not start with 0 (even for numbers from a list or the
directory).
These settings are on the Web page:
¤
Settings Management
Configuring the phone via the Web configurator
¤

Message Notification

¤

Local Settings

139