Table of Contents
Advertisement
Operating
6.1
Adjustments
There are several operating adjustments that can be made to the SITRANS LU180.
To access the operating adjustments, simultaneously press the "4" and "20" keys until the
desired adjustment is obtained. A viewing sequence of the stored value is automatically
initiated. During this time the value can be changed by pressing either the "4" or "20" key.
After viewing or changing, operation automatically reverts to the Run mode (6 secs).
Adjustment
4 mA calibration (Page 24), scrolling
20 mA calibration (Page 25), scrolling
Blanking (Page 25)
Speed of response (Page 27)
Fail-safe (Page 28)
Fail-safe timer (Page 29)
Units (Page 30)
Note
Calibration bypasses the measurement response rate.
SITRANS LU180
Operating Instructions, 09/2021, A5E37100674-AB
Display
6
23
Advertisement
Table of Contents
