Driving Position Memory System (Dpms); Rearview Camera - Honda 2012 Crosstour Technology Reference Manual

DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
1. Turn the ignition switch to ON (II).
Shift into Park (P).
2. Adjust your preferred seat and
outside mirror settings.
Note: A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver's door with the remote and enter
the vehicle.
8
3. Press the SET button. You will
hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.

REARVIEW CAMERA

For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse (R), a real-time image of the area behind your
vehicle is shown in the navigation display, along with helpful parking guide lines.
• The display turns off when you shift out of Reverse.
Models without navigation
Turning the Guide Lines On or Off
Models without navigation
Press and hold the power button for
3 seconds. Repeat to turn back on.
Models with navigation
Models with navigation
Press and hold CANCEL for 3
seconds. Repeat to turn back on.
9