Table of Contents
Advertisement
HFL Phonebook
Store up to 50 names and their phone numbers, which can be used
as speed dials.
Press and release the HFL Talk button before you give a command.
1. Say "Phonebook."
2. Say "Store."
Cellular
Phonebook*
(models with navigation)
Import your entire cell phone's address book to the navigation system.
Press and release the Navi Talk button before you give a command.
1. Say "Display Information."
Say "Cellular Phone."
2. Say "Import Cellular Phonebook."
20
3. Say the name of the contact,
and then the phone number.
4. To call a contact once an entry
is stored, say "Call Mike."
3. HFL begins to import your
contacts to the system.
4. To call a contact, say "Search
Imported Phonebook" and select
the name and number.
*not available on all phones
HOMELINK
The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO
YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO
YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
(if equipped)
®
Press and hold the programmed
3
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO
YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator
HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
21
Advertisement
Table of Contents
