Table of Contents
Advertisement
CLEANING YOUR PYROLYTIC OVEN
After Pyrolytic cleaning
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door.
After cool-down, wipe the ash out of the oven with a
soft damp cloth and warm water. To restore the enamel
shine to more difficult areas, use a damp cloth with
vinegar and detergent.
WARNING
CAUTION
Do not turn off the mains power supply to the oven
during the pyrolytic cleaning cycle. This could damage
the appliance and its vicinity.
Cleaning the cavity well
The cleaning procedure removes limestone residue from
the cavity well after cooking with steam
WARNING
WARNING
Perform the cleaning procedure at least every 5
EasyBake + Steam cooking cycles.
1.
Mix 150ml of tap water with 100ml of white vinegar
and put the mix in the cavity well.
2.
Let the water and vinegar mix dissolve the limestone
residue at the ambient temperature for 45 minutes.
3.
Remove the water and vigenar mix with a soft cloth
and clean cavity with warm water and a soft cloth.
32
32
CLEANING YOUR PYROLYTIC OVEN
(continued)
Advertisement
Table of Contents
