Safety Instructions - Stanton S-700 User Manual

SAFETY INSTRUCTIONS

1. Read Instructions － All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions － The safety and operating
instructions should be retained for future reference.
3. Heed Warnings － All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions － All operating and use instruc-
tions should be followed.
5. Water and Moisture － The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands － The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
6A. An appliance and cart combination
should be moved with care Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
7. Wall or Ceiling Mounting － The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Ventilation － The appliance should be situated so that
its location or position does not interfere with its
proper ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or, placed in a
built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation
openings.
9. Heat － The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
10. Power Sources － The appliance should be con-nected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
11. Grounding or Polarization － Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection － Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, conve-nience
receptacles, and the point where they exit from the
appliance.
13. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
Clean by wiping with a cloth slightly damp with water.
Avoid getting water inside the appliance.
14. Disconnect power cord before servicing.
15. Replace critical components
partsor recommended equivalents.
16. For AC line powered units - Before returning repaired
unit to user, use an ohmmeter to measure iron both
AC plug bade to all exposed metallic parts. The
resistance should be more than 100,000ohms.
17. Nonuse Periods － The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
18. Object and Liquid Entry － Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
19. Damage Requiring Service － The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in perfor-mance; or
E. The appliance has been dropped, or the enclose-
sure damaged.
20. Servicing－The user should not attempt to service the
appliance beyond that described in the opera-ting
instructions. All other servicing should be referred to
qualified service personnel.
21. Ventilation – The appliance should be situated so that
ist location or position does not interfere with its
proper ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or, placed in a
built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation
openings.
22. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
23. Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
2
only with factory