Receiving A Position Request - Standard Horizon Quest GX1255S Owner's Manual

6.5.6 Receiving a position request

When position request call is received from another vessel, a calling alarm
will sound. Please refer to section 7.DSC/RADIO SETUP MODE that allows
the position request to be transmitted manually or automatically. Refer to
7.11 POSITION REQUEST REPLY section for details.
Automatic Reply:
1. When a position request call is received, "RECEIVED
POS REQUEST" will appear on the LCD, and a calling
alarm will sound.
2. Press the any key to disable the calling alarm, then the
requested position coordinates will be transmitted.
5. To exit from position request display, press any key.
Manual Reply:
1. When a position request call is received, "RECEIVED
POS REQUEST" will appear on the LCD, and a calling
alarm will sound.
2. Press the any key to disable the calling alarm.
3. Select type of reply function ABLE or EXIT by using the
UP or DOWN key.
4. When ABLE is selected, press the CALL/SET key. And
the requested position coordinates will be transmitted.
5. To exit from position request display, press any key.
GX1255S Page 27