68012004058-HV
Chapter 7 : Advanced Features
d. Press Sel to confirm the displayed channel.
One of the following scenarios occur:
•
In ARS Server Mode, the display shows the zone and ARS server channel.
•
In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.
•
If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
7.13.2
User Login Feature
This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: A predefined username that is set more than the maximum allowed characters is an
invalid name.
7.13.2.1
Logging In as a User
Procedure:
1 Perform one of the following actions:
•
Press the preprogrammed User Login button.
•
or
to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
•
or
to [ID Entry] and press the Menu Select button directly below Edit to enter
ID. A blinking cursor appears on the screen. Use the keypad to type or edit a user name.
Press the Menu Select button directly below Ok to submit.
•
or
to scroll through the list of predefined user names. Press the Menu Select button
directly below Sel to select the predefined user name.
•
Press and hold
rate. Press the Menu Select button directly below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary Invalid ID.
3 Enter your Personal Identification Number (PIN) number.
4 Press the Menu Select button directly below Logn.
One of the following scenarios occurs:
•
In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In
progress, with Cncl .
•
In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
One of the following scenarios occurs:
80
or
to scroll through the list of predefined user names at a fast scroll