Troubleshooting; Appliance Safety; Error Code / Fault Display / Signal - Siemens SN67ZX01CN User Manual

en Troubleshooting

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting Customer Service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
▶
special connection cable, which is available from the manufacturer or his
Customer Service.

Appliance safety

Fault
Appliance door will not open
or cannot be opened easily.

Error code / Fault display / Signal

Fault
E:12 lights up.
E:14 lights up.
E:15 lights up.
E:16 lights up.
E:18 or indicator for water
supply lights up.
44
Cause
Childproof lock is activated.
Cause
Heating element is furred
up.
Water protection system is
activated.
Water protection system is
activated.
Water is continuously run-
ning into the appliance.
Supply hose is kinked.
Water tap is turned off.
Water tap is jammed or
furred up.
Troubleshooting
"Open the appliance door."
▶
→ Page 37
Troubleshooting
Descale the appliance.
1.
Operate the appliance with the Wa-
2.
ter softening system.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 57.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 57.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 57.
Install the supply hose without
▶
kinks.
Turn on the water tap.
▶
Turn on the water tap.
▶
The flow rate must be at least 10 l/
min when the water supply is open.