Siemens SN Series Instruction Manual
Hide thumbs
Also See for SN Series:
- Instruction manual (56 pages) ,
- Operating instructions manual (46 pages) ,
- User manual (64 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Siemens SN Series
Summary of Contents for Siemens SN Series
- Page 1 Dishwasher SN.../SX... en Instruction manual...
- Page 2 (08@HP`h)")*)2):)B)JX)R 1"1*121:1B1J1R1Z1b1j9"9*929:9B9J...
-
Page 3: Table Of Contents
Table of contents e n I n s t r u c t i o n m a n u a l Intended use ....5 Water softening system / special salt . - Page 4 Additional functions ..30 Fault, what to do? ...38 Save time (VarioSpeedPlus) ..30 Error message ....38 Half load .
-
Page 5: Intended Use
Intended use en from the appliance and power Intended use cable. This appliance is intended ■ Before you switch ON the I n t e n d e d u s e for use in the home and appliance domestic environments. Use the dishwasher only in Please read the instructions for ■... -
Page 6: Installation
en Safety instructions Also follow the installation Installation ■ instructions for the Following installation, ensure dishwasher to ensure that all ■ that the back of the appliances are operated dishwasher is not freely safely. accessible (protection If there is no information or if ■... -
Page 7: In Daily Use
Safety instructions en After installing the appliance, If the appliance is damaged, ■ ■ ensure that the plug is easily especially the control panel accessible. ~ "Electrical (cracks, holes, broken connection" on page 50 buttons), or the door function For some models: is impaired, stop operating ■... -
Page 8: Door Lock
en Safety instructions If the appliance is not in a Keep children away from ■ ■ cavity and a side panel is detergents and rinse aid. accessible, the door hinge These may cause chemical area must be covered at the burns in the mouth, throat side for reasons of safety and eyes or asphyxiation. -
Page 9: Environmental Protection
Environmental protection en Warning Risk of suffocation! Children may become locked in the dishwasher and suffocate. Always completely close the appliance door when leaving the dishwasher. Activate the child-proof lock (door lock) as follows: Pull the catch of the Deactivate the child-proof lock child-proof lock towards (door lock) as follows: yourself (1). -
Page 10: Packaging
en Getting to know your appliance Control panel contain valuable raw materials and recyclable materials. On/off switch Please dispose of the individual parts Programme buttons ** separated according to type. Info button { Please ask your dealer or inquire at Display window at top your local authority about current means Rinse aid refill indicator... -
Page 11: Info Button
Getting to know your appliance en Info button { Press Info button { 8 for 3 seconds until the following text is T he Info button { can be used to indicated on the display window at I n f o b u t t o n display additional programme the top @: information. -
Page 12: Settings
en Getting to know your appliance Initial start-up settings Factory setting Infotext by pressing Info button { Time setting 12:00 Set the current time. Water hardness °E 16 - 20 medium Adjustment to the local water hardness. When using Multitabs, select the lowest setting. - Page 13 Getting to know your appliance en Basic setting Factory setting Infotext; by pressing Info button { Rinse aid dispenser Level 5 Amount of rinse aid affects drying. When using Multitabs, select setting 0. Sensor setting Standard Adjustment of soiling detection for optimum cleaning result.
-
Page 14: Home Connect
en Home Connect Basic setting Factory setting Infotext; by pressing Info button { Greeting When switching on the appliance, the brand logo can be switched off. Factory setting Reset Reset to factory setting. * depending on the configuration of your specific dishwasher -------- Setting up the App Notes... -
Page 15: Wi-Fi
Home Connect en Wi-Fi | I n the Wi-Fi menu you can activate the W i - F i wireless network connection with “on” and deactivate it with “off”. Observe the supplied Home Connect documents. Connect to App The “Connect to App” menu option is Notes not available unless there was a If you have selected the Wi-Fi “off”... -
Page 16: Remote Start Button
en Home Connect Status of any previous resetting to any connection to the Home Connect ■ factory settings. server. This initial registration prepares the Note: If you did not deactivate the Home Connect functions for use and is connection to the Home Connect activated the first time you use these server, check your Internet connection. -
Page 17: Activating Energy Manager
Home Connect en energy manager is unsuccessful, please Where the energy manager „ starts ■ repeat Step 6. the programme earlier, the time display “Ready in” / “Finish at” will Note: The “Energy manager” menu be updated. option is not available unless there was To activate the energy manager „... -
Page 18: Remote Diagnostics
A detailed RED Declaration of “Software update was successfully Conformity can be found online at installed.”. www.siemens-home.bsh-group.com on the product page of your appliance with Notes the additional documents. You can continue to operate your ■... -
Page 19: Water Hardness Table
Water softening system/special salt en your tap water (see following water Make the setting with setting buttons hardness table). + - `. Press and hold the Info button { 8 for 3 seconds. Water hardness table The chosen setting has now been stored. -
Page 20: Detergents With Salt Replacement
en Rinse aid Using detergents with salt Top up the rinse-aid as follows: Open dispenser 92; press lug on replacement substances the lid (1) and lift (2). A ccording to the manufacturers, D e t e r g e n t s w i t h s a l t r e p l a c e m e n t s u b s t a n c e s detergents with salt replacement substances can only be used up to a specific degree of hardness (usually... -
Page 21: Switching Off Rinse Aid Refill Indicator
Utensils en Switch on ON/OFF switch (. Utensils which are soiled with ash, ■ Press Info button { 8 for 3 wax, lubricating grease or ink. seconds until the following text is Aluminium parts in conjunction with ■ indicated on the display window at highly caustic alkaline or highly the top @: acidic cleaning agents, in particular... -
Page 22: Upper Basket
en Utensils rotation of the two spray arms – 1: and 1Z is not obstructed. To save energy and water, load the dishwasher to its specified capacity. Very small items of tableware should not be washed in the machine as they may easily fall out of the baskets. -
Page 23: Cutlery Basket
Utensils en Cutlery basket * P lace cutlery, always unsorted with the C u t l e r y b a s k e t tips face down, in the cutlery basket *. To prevent injuries, place long, pointed implements and knives on the knife shelf *. -
Page 24: Folding Spikes
en Utensils Adjust the height of the etagere as follows: Position the etagere vertically and pull upwards. Push etagere at a slight angle downwards to the required height (1, 2, or 3). Engage etagere. Etagere “clicks” into position. Folding spikes * * Depending on the features of your F o l d i n g s p i k e s dishwasher, the spikes can be folded... -
Page 25: Unloading The Dishwasher
Utensils en If required, the height of the upper basket 12 can be adjusted to create more space for taller utensils either in the upper or lower basket. Appliance height 81.5 cm With cutlery basket Upper Lower basket basket Setting 1 max. ø 22 cm 31 cm Setting 2 max. -
Page 26: Detergent
en detergent Push in upper basket. Upper basket with upper and lower pairs of rollers Pull out upper basket 12. Remove upper basket. Re-attach upper basket to the upper (Setting 3) or lower (Setting 1) rollers. * depending on the features of your dishwasher Push in upper basket. -
Page 27: Adding Detergent
detergent en Warning Risk of injury and damage due to non-observance of the safety instructions for detergent and rinse-aid products! Always follow the safety instructions for detergent products and rinse-aid products. Adding detergent If the detergent dispenser 9: is still The detergent dispenser opens closed, actuate locking bar 9B to automatically at the optimum time... - Page 28 en detergent from a water hardness of 14° dH If you switch from combined ■ (25° fH, 17° Clark, 2.5 mmol/l). detergents to solo detergents, ensure that the water softening As soon as combined detergents are system and amount of rinse aid have used, the rinse programme is adjusted been set to the correct value.
-
Page 29: Overview Of Programmes
Overview of programmes en Overview of programmes T he max. possible number of programmes is illustrated in this overview. The O v e r v i e w o f p r o g r a m m e s corresponding programmes and their arrangement can be found on the fascia. -
Page 30: Programme Selection
en Additional functions Type of dish Type of soiling Programme Possible Programme sequence additional options Time-optimised: u / t / part dried, common Cleaning 60° mixed utensils household food Intermediate rinse and cutlery remnants Rinsing Short 60°C Drying sensitive Time-optimised: ñ... -
Page 31: Hygieneplus (Hygieneplus)
Operating the appliance en ß detergent in the detergent dispenser Energy Save * than for a full load. T he “Energy Save” function can be E n e r g y S a v e used to reduce water and energy μ... -
Page 32: Aquasensor
en Operating the appliance The chosen setting has now been During the washing step this heat stored. energy is used to dry the mineral and heat up the rinsing water. Tip: If you change several settings, first During the drying phase moisture from make all changes in succession. -
Page 33: Extradry
Operating the appliance en emotionLight (interior dried on food remnants. This setting is recommended if using biological or eco lighting) * detergents which contain lower * Depending on the features of your amounts of active agents. The energy E m o t i o n L i g h t dishwasher and water consumption is adjusted accordingly. -
Page 34: Changing Start Programme
en Operating the appliance Factory setting the appliance door. Do not open the appliance door until the light point is no You can reset all settings to the factory longer visible on the floor. If the setting. appliance door is not completely closed, the light spot flashes *. -
Page 35: Programme End
Cleaning and maintenance en Keep pressing the setting buttons + - connection or is heated, always leave ` until the displayed time the door ajar for several minutes and corresponds with your requirements. then close. Press START button )2, timer Open the door. -
Page 36: Overall Status Of The Dishwasher
en Cleaning and maintenance faults. This saves time and prevents Never clean the dishwasher using a ■ problems. steam cleaner. The manufacturer is not liable for any consequential damage. Overall status of the Wipe the front of the dishwasher and ■... -
Page 37: Special Salt And Rinse Aid
Cleaning and maintenance en particular commercial or industrial The filter system consists of cleaning agents, do not put aluminium a coarse filter ■ parts in the dishwasher. Danger of a flat fine filter ■ explosion. a microfilter ■ After each washing cycle check Notes Remove any coarse soiling in the the filters for residue. -
Page 38: Spray Arms
en Fault, what to do? Spray arms Note: If the appliance stops during dishwashing or does not start for no Limescale and contaminants in the obvious reason, first run the Abort rinsing water may block nozzles and programme function (Reset) bearings on the spray arms 1: and ~ "Operating the appliance"... -
Page 39: Fault Table
Fault, what to do? en Scoop out water, use a sponge if Check impeller wheel and remove required. any foreign objects. Prise off the pump cover (as shown) Place pump cover in the original using a spoon. Grip the pump cover position (2) and press down until it by the crosspiece and lift diagonally engages (3). - Page 40 en Fault, what to do? Fault Reason Remedial action Fault code “:‹ˆ is lit. Intake opening (on right inside of Arrange utensils so that the intake appliance) covered by utensils. opening is not obstructed. Fault code “:‚ƒ is lit. Heating element calcified or Clean appliance with dishwasher cleaning soiled.
- Page 41 Fault, what to do? en Fault Reason Remedial action Energy manager does not Connection to the energy Refer to the instructions for use from the connect to the energy manager of the home system is energy manager manufacturer for your manager of the home not available.
- Page 42 en Fault, what to do? Fault Reason Remedial action Utensils not dry. Not enough rinse aid in the Refill rinse aid. dispenser, or none at all. Programme without drying was Select programme with drying. selected. ~ "Overview of programmes" on page 29 Water collecting in depressions Arrange utensils in a sloping position, on the utensils and cutlery.
- Page 43 Fault, what to do? en Fault Reason Remedial action Food remnants on the Utensils placed too closely Arrange utensils with adequate clearance utensils. together, utensils basket between them ensuring that the spray jets overfilled. can reach the surface of the utensils. Prevent contact points.
- Page 44 en Fault, what to do? Fault Reason Remedial action Detergent residue Detergent dispenser cover 9: Utensils must not be placed above the blocked by utensils and therefore tablet collecting tray 1B. These may does not open fully. block the lid of the detergent dispenser and prevent it from opening fully.
- Page 45 Fault, what to do? en Fault Reason Remedial action White, stubborn coatings; Detergent substances are Change detergent brand. limescale on the utensils, deposited. These coatings cannot Clean appliance mechanically. container or door. usually be removed with chemicals (appliance cleaner, ...). Hardness range incorrectly set or Set water softening system according to water hardness greater than 8.9...
- Page 46 en Fault, what to do? Fault Reason Remedial action Plastic parts discoloured. Too low rinsing temperature. Select programme with higher washing temperature. Utensils precleaned too intensely; Do not prerinse utensils. Remove only sensors therefore decide on large food remnants. weak programme sequence. Increase sensitivity of the sensors.
- Page 47 Fault, what to do? en Fault Reason Remedial action Appliance cannot be Malfunction. Disconnect appliance from the power switched on or operated. supply; pull out the mains plug or switch off the fuse. Wait at least 2 minutes, then connect the appliance to the power supply.
-
Page 48: Customer Service
en Customer service Fault Reason Remedial action Filling valves making Depends on domestic installation, No remedial action possible. striking noises. as no appliance fault. No effect on appliance function. Knocking or rattling noise. Spray arm strikes the utensils, Position utensils so that the spray arms do utensils not positioned correctly. -
Page 49: Contents Of Package
Installation and connection en Contents of package Left-on mode duration 0 mins Time after which the appliance is 2 mins If you have any complaints, contact the switched to networked standby mode dealer from whom you purchased the appliance or our customer services. Complies with the latest regulations Dishwasher (EU) for energy label and ecological... -
Page 50: Drainage Connection
en Installation and connection Drainage connection e.g. solar heating system with circulation line. This will save energy and time. The “Hot water” setting allows The required work sequence can be you to adjust your dishwasher optimally found in the installation instructions. to operation with hot water. -
Page 51: Removal
Installation and connection en The connection may be modified Close the door. ■ by technicians only. Open the door after approx. 1 A power cord extension may be minute. ■ purchased from customer service The display window at the top @ only. - Page 52 *9001397792* 9001397792 (9809-1) 642 TW...