Daikin FTXS15WVJU9 Abbreviated Operation Manual page 17

NOTE
„ Notes on COMFORT AIRFLOW operation
• The position of the flaps will change, preventing air from blowing directly on the occupants of the room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW function will be canceled.
„ Notes on INTELLIGENT EYE operation
• Application range is as follows.
Vertical angle 90°
(Side view)
90°
• Sensor may not detect moving objects further than 23ft (7m) away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
• NIGHT SET mode
Page 20
„ Notes on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation
• The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW operation will be canceled.
Priority is given to the function of whichever button is pressed last.
CAUTION
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor's detection area. This sensor can detect undesirable objects.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
„ To start operation
Press
• Each time the
• When INTELLIGENT EYE is selected, the INTELLIGENT EYE lamp lights green.
• By selecting "
COMFORT AIRFLOW operation combined with INTELLIGENT EYE operation.
COMFORT
AIRFLOW
• When the flaps (horizontal blades) are swinging, selecting any of the modes
above will cause the flaps (horizontal blades) to stop.
„ To cancel operation
Press
• If the INTELLIGENT EYE operation was being used, the INTELLIGENT EYE lamp goes off.
Horizontal
angle 110°
55° 55°
(Top view)
will not go on during use of INTELLIGENT EYE operation.
and select the desired mode.
is pressed a different setting option is displayed on the LCD.
Display
" from the following icons, the air conditioner will be in
INTELLIGENT Combination
EYE
and select "blank" on the LCD.
Operation
blank
No Setting
16