Answer A Call; Adjust Volume; Mute; End A Call - Motorola L404C User Manual

Doc Title : Product Data - User Manual
Model : Motorola Active Pro (L402C)
9.1.6

Answer a call

1. When the phone rings and flashes in the display, press <Talk on> or press <Speaker> to answer the call via the
loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your hearing.
Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset
is not too close to your ear.
TIPS
If Auto Talk mode (see Section 6.6 for more details) is on, simply lift up the handset from its base to answer the
call. The default setting is Off.
NOTE
An incoming call has priority over other events. Whenever there is an incoming call, other operations in progress
such as phone settings, menu navigation, etc. will be ended.
9.1.7

Adjust volume

1. During a call, press <Up/Down> to adjust the earpiece or loudspeaker volume.
- The level is shown in the handset display.
9.1.8

Mute

Mute the microphone so that you can talk to someone else in the room without your caller hearing you.
1. During a call, press <Mute/Clear>.
- The microphone is muted.
2. Press <Mute/Clear> again to turn the microphone back on.
9.1.9

End a call

1. During a call, press <Talk off> or <Speaker>.
After you hang up, the duration of your call is displayed for 2 seconds.
9.2

Intercom

This feature is only available when there are at least 2 registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use the conference option.
9.2.1

Call another handset

1. Press <Intercom>.
2. Press <Up/Down> to the handset you want to call.
3. Press <Menu> to call the handset.
TIPS
You may enter the number of the handset (1 to 5) you want to call.
4. Press <Talk off> to hang up.
NOTE
If the handset does not belong to the valid range, this function may not be available.
9.2.2

Transfer an external call to another handset

1. During an external call, press <Intercom>.
- Your caller is put on hold.
2. Press <Up/Down> to the handset you want to call.
3. Press <Menu> to call the handset.
TIPS
You may enter the number of the handset (1 to 5) you want to call.
4. When the other handset answers by pressing <Talk on> or <Speaker>, press <Talk off> to transfer the call. If the
other handset does not answer, press <Intercom> to talk to your caller again.
9.2.3

Three-party conference call

1. During an external call, press <Intercom>.
- Your caller is put on hold.
2. Press <Up/Down> to the handset you want to call.
3. Press <Menu> to call the handset.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
30 of 46