Registration; Register A Handset; D E - Register All Handsets - Motorola L404C User Manual

Doc Title : Product Data - User Manual
Model : Motorola Active Pro (L402C)
7

REGISTRATION

Up to 5 handsets can be registered to one base station. Additional handsets must be registered to the base before
you can use them.
• The instructions described below apply specifically to your additional handset. If you wish to register another
manufacturer's handset, the instructions may vary. In this case, please refer to the manufacturer of the additional
handset.
7.1

Register a handset

The original handset is pre-registered to use. To register an additional handset,
1. Place the unregistered handset on the charging cradle of charger.
2. Press and hold <Find> for 4 seconds on base.
3. Release <Find> once IN USE LED is flashing.
4. A confirmation tone is generated if registration is successful and HANDSET X is displayed where X denotes the
number of handset.
7.2 De-register all handsets
1. Unplug the power from the base.
2. Press and hold <Find> on base for 10 seconds.
3. Plug the base power.
4. Release once IN USE LED starts to flash rapidly.
5. Within 2 seconds, press and release <Find> on base again will de-register all handsets and the IN USE LED on
base will be OFF. NOT REGISTERED is displayed on all handsets.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
26 of 46