Siemens TP27 Equipment Manual page 200

System Messages
Message
Please wait Mode change in progress or recipe function
started.
Ready for trans- Waiting for data from PU/PC
fer
Data transfer Data transfer between PU/PC and OP in prog-
ress
Firmware not The firmware can not be used for the current
compatible configuration
EPROM Memory module defective or internal hard-
ware fault
memory failure
RAM memory
failure
Flash memory Memory module defective or transmission er-
failure ror
C-2
Cause
Send unit for repair quoting details of error
message
Retransfer configuration or send OP for repair
Remedy
g
TP27, TP37 Equipment Manual
Release 01/00