Siemens TP27 Equipment Manual page 108

Storing and Loading Data
Insert memory Use Slot B to plug the memory card into the TP37 and TP27–10. Only one slot
card is available in the TP27–6. The slot is described for TP37 in chapter 16.3, for
TP27-10 in chapter 15.3 and for TP27-6 in chapter 14.3.
Backup
A backup flash
flash module
the Touch Panel:
Restore
If a memory card only contains recipe data records, they can be restored to the
module flash
Touch Panel in normal operating mode:
Note
Recipe data records, stored on the memory card using Backup, must first be
transferred to the internal flash using the Touch Panel with the Restore func-
tion before they can be edited.
Recipe data records, saved directly on the memory card (e.g. using standard
screen Data Record Processing and Transmission), cannot be transferred back
into the internal flash using Restore.
9-6
Call Help text on standard screen
Help
Exit from standard screen
ESC
module process can be carried out in normal operation of
Step
1 Insert the memory card in Slot B of the Touch Panel.
2 Delete the memory card contents before initiating the backup
(see chapter 9.2).
3 Start the backup function by touching the corresponding button on
the Backup/Restore standard screen. After successful transfer, a
message is appears on the Touch Panel.
4 Remove the memory card from the Touch Panel.
Step
1 Insert the memory card in Slot B of the Touch Panel.
2 Start the restore function by touching the corresponding button on
the Backup/Restore standard screen.
The recipe data records in the internal flash memory are
overwritten by the data records read in from the memory card.
3 Remove the memory card from the Touch Panel.
Action
Action
TP27, TP37 Equipment Manual
Release 01/00